canon ir 2202
am facing E0001-000 on new canon ir 2202 ;
can any one know how to reset error from this model?
Please follow the below procedure to enter Service Mode
1. In standby mode, press the "Settings/Registration" key.
2. Press the "Reset" key.
3. Press the "Back" key.
4. Press the "Settings / Registration" key.
5. The service mode screen is displayed.
Use the “Back” key to exit Service Mode
COPIER> FUNCTION> CLEAR> ERR; and then turn OFF and then ON the power.
Hello Good day i have the same problem with my ir 2202 but i cant follow the instructions how do we enter service mode on ir 2202?
How to enter service mode, ImageRunner2202
i find out how to enter service mode
here is the link to assist more on youtube
If you still facing that trouble try it to check your supply if the requirement is 220 volts sometimes if you plug-in into 110 v that trouble might be displayed......