re-mita 1560 Machine dead

[Transpost1]

Posted by phil on 10/24/2004
machine dead,have changed power supply;
checked lead and on/off switch.worked on a lot of these machines not come across this one.If i can help anyone with other faults on same machine don't hesitate.

User "Transpost1" was created to allow us to move posts from one forum to another.

[Transpost1]

Posted by raym on 10/26/2004
phil, i've worked on the cs2115 alot which is the equivalent of 1560 but never had that problem. i'm sure you checked all safety switches and other obvious things. i would disconnect plug cn1 from main board. your problem may lie in a shorted hvt and that should let it power up if its the problem. also check your 5v andd 24v at main board. cn4-2=5v, cn4-4=5v grnd, cn4-1=24v, cn4-3=24v power ground. if incorrect, probably main bd. good luck on this one.