Ktocera 1530 Memory full/overfull

[bustek]

Happens mostly when printing. Is it something as simple as increaseing memory? If so, does anyone have a source?
Also, the customer say's the only way they can clear this signal is by powering off/on. Is she"nuts", or is that the correct provedure.
Thanx
kEN
ps Who carries imaging units for these things?

[sergeysm]

I correctly have understood, what on the device there is an indication " Memory Overflow/Data Error indicator "?

[KJ1110]

Probably you have minimum memory installed; my rule of thumb is to max out ALL memory at the outset of the sale and you avoid a lot of different problems!

[bryan_soz]

Hello there !
It seems to me that whenever your customer tries to print something he does not do the page layout and the paper size settings in the printer properties settings manny a times it can also happen if the waste toner tank is not fixed properly ,
It at all you face any difficulties please feel free to contact me on 091 9226487316 Thnx
Brian

the copier wizard

[akhir]

Memory overflow is caused by insuffcient memory resources. These are almost always caused by large jobs, usually with legal paper, but can happen with letter as well.

Lee Coughran
Network Engineer

[mitamike]

What you need is 128mb ram goes into print board this will fix your problem.

[goryo]

or just try to upgrade the printer driver