MITA 1560

[JIMFROMCANADA]

odd ball machine for us display says AP and keeps running on any ideas ? or should we tell customer to use as boat anchor.


thanks in advance.

[raym]

well, that wasn't the best model that mita put out, however, your "AP" message is indicating your machine is adding toner to keep up with the density m/c was set at during developer replacement. this can happen due to a large copy run with alot of black/density on copies, or optics are running dark, developer may be worn(80K) or machine is getting close to running out of toner, which the toner light will come on after m/c runs for alloted time. about 2 mins. or so.

good luck,
ray

p.s. this m/c needs to have waste toner hopper vacuumed out every 40 to 60k or tub fills up, causing cl. unit auger to back out and taking out drum.

[COPYROM]

Hi! Comparing with mita 1555 and (wooow) mita 1556, the 1560 is a more reliable machine. I have some which have 1000k (one million)copies! of course, changing many spare parts! About your question,in "addenda" of < raym > you can check if the front connector is OK.Did the toner motor is rollin? If you have not solved this problem, give us more details. Good luck! COPYROM

[drfax]

mITA 1560 AND mITA 1860 Excess toner usage. Help....
After about 75,000 copies they start to **** down toner like crazy. 1st time, we cleaned out the toner hopper and seemed ok. about a month later, hoppers filled up to overflow. 2nd trip (closer inspection) noticed that immediately after clean-out and refil of toner, toner add moter would'nt stop. Went thru entire clean-up; vaccumed out toner hopper; installed new toner; and RESET toner bias level. cLEANED TONER AUGER, RESET SIMULATION 62 TO 70; ADJUSTED AUTO EXPOSURE; CLEANED ROLLERS. Seemed OK. toner add motor stopped and seemed to respond norally. Self congratulation stopped about 2 weeks later when toner ofill problem came back. ANY IDEAS>>>

Working For A Living


Working For A Living

[peet]

Did ypo try to change dev??
set sim 32 to default 190-110

succes Peet

[drfax]

Thanks for developer tip. - Will try that tomoroow and let you know how it turns out

Working For A Living