Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: problems c6 020 km 1500

  1. #1
    Member
    Join Date
    Jan 2006
    Location
    san ysidro californa
    Posts
    42
    any help please i reset but still same problem make 2 or 3 copies and apears same code the manual say memory input interfase


  2. #2
    c6020 is fuser overheat , check fuser lamp isnt black.


  3. #3
    Error code 6020 is not a fuser problem. The error is for a memory input problem. The length of time it takes to process an image input (1o sec.) is not completed within the aloted time. Problem is in main logic board.


  4. #4
    Member
    Join Date
    Jun 2006
    Location
    Moscow, Russia
    Posts
    40
    Error code 6020 is not a fuser problem. The error is for a memory input problem. The length of time it takes to process an image input (1o sec.) is not completed within the aloted time. Problem is in main logic board.
    Its totally ludicrous.

    From SM:
    Abnormally high fixing unit thermistor
    temperature
    The fixing temperature exceeds
    230C/446 F for 40 ms.

    This message was edited by Webmaster on 9-19-06 @ 11:31 AM

  5. #5
    Too bad APS doesn't know what a c6020 on a 1500 is, it is a fuser probleon other models of Kyocera and Copystar but not on a 1500! Sorry


  6. #6
    enter in simulatio mode and you decrease all the values of 10 points


  7. #7
    Hello Mr Ferdie...
    U mention enter in simulation mode and to decrease the value by 10 points.

    which simulation mode you were referring to?




  8. #8
    Press the stop/clear key, start key
    and the left copy exposure adjustment
    key in the order presented and hold
    them down.
    Press the stop/clear key.
    Now you are in maintenance mode

    U163 Resetting the fixing problem data

    U161 Setting the fixing control temperature
    Description
    Changes the fixing control temperature.
    Purpose
    Normally no change is necessary. However, can be used to prevent curling or creasing of paper, or solve a
    fixing problem on thick paper.
    Method
    Press the start key. The screen for selecting an item is displayed.
    Setting
    1. Select the item to be set by lighting a copy exposure indicator using the copy exposure adjustment keys.
    2. Change the setting using the zoom +/ keys.
    Copy exposure
    Description Setting range Initial setting
    indicator
    Exp. 1 (lit) Primary stabilization fixing temperature 100 to 165 (C) 125
    Exp. 2 (lit) Secondary stabilization fixing temperature 100 to 165 (C) 135
    Exp. 3 (lit) Copying operation temperature 1 160 to 220 (C) 180
    Exp. 1 (flashing) Copying operation temperature 2 160 to 220 (C) 195
    Exp. 2 (flashing) Number of sheets for fixing control 1 to 99 5

    3. Press the start key. The value is set.
    Completion
    To exit this maintenance item without changing the current setting, press the stop/clear key. The indication for
    selecting a maintenance item No. appears.





  9. #9
    Member
    Join Date
    Jun 2006
    Location
    Moscow, Russia
    Posts
    40
    Too bad APS doesn't know what a c6020 on a 1500 is, it is a fuser probleon other models of Kyocera and Copystar but not on a 1500! Sorry
    My phrase from SM for Kyocera KM-1500 Published in May'03 842DC11 Revision1.

    ble310 has mixed codes C0620 and C6020.

    Which comments?

    This message was edited by APS on 10-16-06 @ 9:36 AM

  10. #10
    Member
    Join Date
    Jun 2006
    Location
    Moscow, Russia
    Posts
    40


    This message was edited by APS on 10-16-06 @ 9:36 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •