Replyhi
did the drum new?
if the drum surfece have a circle of a scrach in one of the sides
Copiers Duplicators Accessories Copy/White Boards Fax Machines Micrographics Parts Postage/Mailing Equipment
Scanners Software Supplies Toner Consumables Copier Parts Facsimile Parts Other Parts
Scanners Software Supplies Toner Consumables Copier Parts Facsimile Parts Other Parts
Thanks: 0
Likes: 0
Results 1 to 4 of 4
-
05-02-2013, 11:10 PM #1Senior Member
- Join Date
- Sep 2007
- Posts
- 116
- Post Thanks / Like
Minolta bizhub 250 display c25557(ATDC)
my custumer machine got c25557 on display.i have change value at the ATDc gain until the hightest setting (255) and run F8 but problem still same.i just replaced developer tank with new ATDC sensor but nothing changed.refer to minolta service manual it recommend to replaced pwb A after replaced dev sensor and powder.Now i like to order PWB A but still looking for board part number.any body have the part number or any suggestion to deal with this problem.your feed back is very appreciated.thanks.
-
09-22-2013, 05:42 AM #2Junior Member
- Join Date
- Jul 2010
- Posts
- 8
- Post Thanks / Like
bh 250
-
10-07-2013, 06:53 PM #3Senior Member
- Join Date
- Sep 2007
- Posts
- 116
- Post Thanks / Like
thanks.after replace new developer powder and drum unit problem gone
-
12-16-2016, 10:40 AM #4Junior Member
- Join Date
- Dec 2016
- Posts
- 2
- Post Thanks / Like
I ask for help c2557 Bizhub250
I have the same error and the new drum has rather the layer in the form of a circle of a strangulation on one side.
I ask for help
Posting Permissions
Feedback Buttons provided by Advanced Post Thanks / Like (Lite) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
© 2012- Asay Media Network
