Thanks Thanks:  0
Likes Likes:  0
Results 1 to 4 of 4
  1. #1
    Junior Member
    Join Date
    Nov 2004
    Posts
    10
    Post Thanks / Like

    New Zeus range of bizhub C224 etc jamming on letter headed paper.

    Hi has anyone experienced the new range of bizhub e machines jamming on letter headed paper.

    If so what have you done if anything to stop it..

    Ive tried the new ribbed feed rollers...

    Thanks

  2. #2
    Junior Member
    Join Date
    Dec 2004
    Posts
    5
    Post Thanks / Like
    If its from tray 2, remove the full pf section and bend the outside edges where the screwholes are slightly so that the unit is sticking out further (only a couple of mm) then reattach. This applies a little more pressure to the first set of transport rollers.

  3. #3
    Junior Member
    Join Date
    Apr 2015
    Posts
    1
    Post Thanks / Like
    If so what have you done if anything to stop it..???
    Last edited by xzafareman; 04-15-2015 at 12:57 AM.

  4. #4
    Junior Member
    Join Date
    Jan 2016
    Posts
    4
    Post Thanks / Like
    try the mod ribbed roller ( on the shaft as it gets fed up, or put it in the bypass on thick 1 so it up's the temp and slows the machine down a bit, good luck.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •