Thanks Thanks:  0
Likes Likes:  0
Results 1 to 5 of 5

Thread: canon ir 2202

  1. #1
    Member
    Join Date
    Nov 2004
    Location
    Rwanda
    Posts
    53
    Post Thanks / Like

    canon ir 2202

    am facing E0001-000 on new canon ir 2202 ;
    can any one know how to reset error from this model?

  2. #2
    Junior Member
    Join Date
    Nov 2013
    Posts
    3
    Post Thanks / Like

    Canon iR2202

    Hi

    Please follow the below procedure to enter Service Mode
    1. In standby mode, press the "Settings/Registration" key.
    2. Press the "Reset" key.
    3. Press the "Back" key.
    4. Press the "Settings / Registration" key.
    5. The service mode screen is displayed.
    Use the “Back” key to exit Service Mode

    COPIER> FUNCTION> CLEAR> ERR; and then turn OFF and then ON the power.

  3. #3
    Junior Member
    Join Date
    Dec 2016
    Posts
    2
    Post Thanks / Like
    Hello Good day i have the same problem with my ir 2202 but i cant follow the instructions how do we enter service mode on ir 2202?

  4. #4
    Junior Member
    Join Date
    Dec 2016
    Posts
    2
    Post Thanks / Like

    How to enter service mode, ImageRunner2202

    i find out how to enter service mode
    here is the link to assist more on youtube
    https://youtu.be/5zfX_aV_Nio
    https://www.youtube.com/watch?v=5zfX_aV_Nio

  5. #5
    Junior Member
    Join Date
    Dec 2016
    Posts
    5
    Post Thanks / Like
    If you still facing that trouble try it to check your supply if the requirement is 220 volts sometimes if you plug-in into 110 v that trouble might be displayed......

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •