Results 1 to 4 of 4

Thread: Canon ir 3300 error code e000220-001

  1. #1

    Canon ir 3300 error code e000220-001

    my canon ir 3300 is giving me error code e000220-001 ,i change the scanner lamp and the invertor pcb ,but i still have the same code,i also change the reader controller pcb ..... any help ... thx

  2. #2
    Be sure and clear the E code.

    Check and verify the 24V supply to the Reader Controller from the Main Power Supply is present. It is possible that one of the loads on the DC-Controller can take down the 24 volts. Remove the 24volt loads off the DC-Controller and connect the connectors one by one to locate the short or defective load.

  3. #3
    Wiring Is the wiring from the scanning lamp to the reader controller PCB normal? NO: Connect the connector firmly, and correct or replace the wiring. 2. Inverter PCB, Reader controller PCB Try replacing the lamp inverter PCB. Is the problem corrected? YES: End. NO: Replace the reader controller PCB.

  4. #4

    Canon ir 3300 error code e000220-001

    Wiring Is the wiring from the scanning lamp to the reader controller PCB normal? NO: Connect the connector firmly, and correct or replace the wiring. 2. Inverter PCB, Reader controller PCB Try replacing the lamp inverter PCB. Is the problem corrected? YES: End. NO: Replace the reader controller PCB.





    Linda
    -------------------------------------------------------------------------------------
    china spare part, Toner chip, Copier parts, Toner Cartridge - einmay toner

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •