Thanks Thanks:  0
Likes Likes:  0
Results 1 to 5 of 5
  1. #1
    Junior Member
    Join Date
    Jul 2005
    Posts
    2
    Post Thanks / Like

    Toshiba e210c
    Onboard Fiery Controller

    ---

    When turning the printer on the "Wait warming up" prompt never disappears and the printer is unusable.

    Does anyone know:

    1. What might be causing this to happen?
    2. What I can do to fix this problem so the printer works again?


    Thanks in advance for any help you can provide.




  2. #2
    Member
    Join Date
    Jan 2005
    Posts
    63
    Post Thanks / Like
    I have seen this problem on the FC-22. On the power supply there are 4 or 5 very small green fuses one of them is blown.


  3. #3
    Junior Member
    Join Date
    Jul 2005
    Posts
    2
    Post Thanks / Like
    Thanks for the information.

    Do you have any idea how I find the fuses on my machine?




  4. #4
    Junior Member
    Join Date
    Jul 2005
    Posts
    16
    Post Thanks / Like
    Hi,

    a) I have seen this problem with the eS-210c in case, that the duplex unit was not properly fitted.

    You can take off the ADU and power on the copier. If it is the ADU the Fiery RIP will go online after a certain time.

    b) the image of the embedded controller is corrupted. The only thing that helps is to download a new image from the controller system software CD.

    Maybe you can verify if the controller works well in another copier.

    Regards,


  5. #5
    Junior Member
    Join Date
    Aug 2020
    Posts
    2
    Post Thanks / Like
    i have same problem with my unit toshiba e-studio 233

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •