PDA

View Full Version : Sharp SF 7350... L5 code and loud clicking...



thecopyman
02-19-2006, 08:28 PM
The lens motor max's out and clicks, when it does work the lens can't find home position, just moves back and forth many times then finally the lens motor starts clicking again but only when it goes all the way to the end. I cleaned the sensor and all lens motor contacts, sensor contacts, board contacts etc. Also the Scan clutch clicks loudly when you can make a copy and even though the copier is set to 100% it enlarges. AND Yes I have the timing mark on the black gear lined up with the arrow on the br*ss teeth. Anyone have a used lens motor and scan clutch *ssembly I can buy? Or any other suggestions?

tinman
02-22-2006, 07:52 PM
Hi

The Lens Home Position Sensor is shot and needs replaceing ( LHPS )
Regards

Tim