View Full Version : Di 250f- C0070

06-26-2006, 08:50 PM
Customer has a Di250f with a C0070 error. Said the toner bottle was yanked out. Can it be reset?

06-26-2006, 09:11 PM
Can be reset by opening the right side door. Chances are you will have to replace the toner gears.
If you have a Di200/251/351 you can take the toner motor and the CN connector off and install onto a Di250/350 to help prevent the C0070 code from returning. There is also a fuse on the PWB-A or MFB board that mey be blown that will cause the same symptom if everything else checks out.

This message was edited by mincopier on 6-27-06 @ 4:57 PM

06-27-2006, 08:35 PM
also could the (bottle transport mechanism)frame be broken, had this problem 3 times. Caused by brutal toner bottle replacements :)

DM - A Broken Frame

06-27-2006, 08:38 PM
This problem could be caused by users. They are not usually willing to wait for stoping toner replenishing mechanismus and they usually change the toner bottle when it is turning. This matter happen when the machine displays toner empty, the toner bottle is empty and replenishing toner machnismus turns by bottle for long time. They will open the cover and the bottle stop at abnormaly position. They will pull it using strong arm.
Insure yourself if they know how to change toner bottle.