PDA

View Full Version : Minolta EP3050 please add toner blocked



mivarom
08-02-2006, 08:48 PM
The copier display this message and hangs that way.
Changed the toner bottle. No change. Change the image unit with working one from another 3050. No change
The toner empty stop was set to yes, i,ve set it to no bu ..probably too late :)..it was doing some copies and than it stopped whit this message and it seems nothing helped.

Any ideeas?

artfer
08-05-2006, 09:16 PM
My friend,
make sure the machine runs the initial rotation a few time after power on. If no, check the rear door safete sensor. Some of Minolta do this.
Please, let me know if this works for you, if not, we'll try another thing.
Good luck!!


Artur Fernando
Minolta Service Man
Betim / Minas Gerais / Brasil

mivarom
08-06-2006, 08:04 PM
Thank you Fernando. Problem solved. I use to keep the rear cover open for a quick service when needed and I didn't saw the safety senzor and since the copier did no problems I keept it that way. Thanks again.

Michael