View Full Version : help me minolta ep5000 jamming

08-11-2006, 09:41 PM
when print sometime just stop in the fusing unit,i also change the order fusing unit but also same pro.(the paper not in fusing unit yet then paper stop there)

08-16-2006, 08:40 PM
If it happens when U make single copy or it happens when U make Multiple copies? Usually if it is multiple copies then its the Paper Feed syatem from the selected Paper drawer but if it is happening in single copy as well then U have to check your fuser. Do you get any other codes with that?

08-17-2006, 08:38 PM
Make sure the fuser entry plate is not all gummed up, or flipped up to block the paper path. Check your transfer belts to make sure there is not toner all over them causing slippage. Make sure your paper feed is on time and not slipping, the timing will stop the cycle.

08-24-2006, 07:44 PM
Just remove the ozone filter, the one for the Suction Fan. And if problem solved clean it or get new one.Common problem for 3050/4050/4000/5000 models.

08-25-2006, 08:23 PM
Thk for reply.The problem is pu board.