PDA

View Full Version : Minolta Di 2011



ruben
08-28-2006, 09:17 PM
I have a problem with that copier. When i make a simple copy, everything is og. But, when i want to do a copy on bouth side, apears a problem. On firs side, the co[y is ok, but on second side, the copy is too light! I have the same problem if i use byp*sss. So, the duplex unit is ok. But evry time when i put in byp*ss/or duplex the paper, will apers that problem: on firs side of copy, image is ok, but on second side of copy, the image is very, very light!
Please help! The imaging unit has made 323K copy.Is that a problem?
Thank you!

artfer
09-03-2006, 10:13 PM
Sorry my english,

its a transfer problem, there is a plate that makes the contact of the machine and the right door (transfer roller), press this plate to rear side of the machine, "not too much" (we normally think this is the wrong action, but it isn't.
if this don't work, let me know and I will send an e-mail to you shown how to do.


Artur Fernando
Minolta Service Man
Betim / Minas Gerais / Brasil