PDA

View Full Version : sc46-08



mousa
08-28-2007, 07:22 PM
hi
sc46-08 code at start up for konica 7155
pls help

suprtek
09-02-2007, 07:54 PM
Try re-seating or replacing the memory on the image control bd. Also re-seat all connections on the image control bd including the NovRam. I've seen glitches in the NovRam cause unusual codes. Sometimes changing the data in some of the feed timing adjustments seems to stabilize it. (If that works, you can change the data back to the original settings and it will still work) Beyond that, you may have to replace the image control bd,system bd, or NovRam. Do a management list print first if you have to replace the Novram because you will lose all your memory. There is a procedure to reset the internal counter if you need to.