PDA

View Full Version : develop 350 ineo



giano
12-05-2007, 08:02 PM
Can anybody tell me what code c2557 means?
I am a Ricoh tech . Thanks.

technical
12-09-2007, 06:55 PM
refer to:

Discussion Topic: bizhub 350 error c2557

http://www.thecopiernetwork.com/viewmessages.cfm?Forum=123&Topic=17484 :8|:

This message was edited by technical on 12-10-07 @ 6:23 AM

kalindd
12-16-2007, 07:14 PM
If you reset the drum counter without replacing the drum and developer , and mostly developer , this code will appear. What you can do is to reset the drum counter in PM service mode. Turn off the machine . Replace the drum, turn back on the machine , with the right door open. Enter service mode go to F8 close the door, and push the start button. In most cases you will succeed with new F8 result. Then C2557 will be gone. Good luck.

giano
12-16-2007, 07:22 PM
Change drum message appears before the error code 2557. DO i have to replace the drum uni? Can anybody tell me how to clear this code if i choose to use non OEM drum.