PDA

View Full Version : sharp ar337 F2-00



stobby2
04-21-2009, 09:25 PM
got an F2-00 error after customer added toner, hoovered machine out stripped and cleaned drum unit, sensors etc, still got error, drum and blade seem in good condition so assume poss dev fault any help would be appreciated plus how do you get into service mode to reset dev when new installed. Sharp copier guy on holiday and l am left with the problem!!!

cheers
rog

wadezilla
04-26-2009, 10:07 PM
Dont replace your developer before you fix your toner roller, because you will be in the same shape as before. You have foam missing on your toner roller(gauranteed)which allows toner to drop straight down into the DV Unit. You will need a toner roller and the two end seals. The toner Roller NROLP1211FCZ1
The Seals are PSEL-0751FCZ1. Once you remove the toner from the hopper they are very easy to replace. DV replacement code is Program/Interupt/clear/Interupt 25-2 execute CA