View Full Version : Sharp ARM150

06-22-2011, 10:13 PM
When starting up in the morning this machine gives
an rattling noise, if gears are not working
properly. However no paper jam or misfeed errors.
During the day it gets better, no sound after 3 or 4
hours. Replaced the heater gear, reduced pressure on
lower heaterroller, still customers complains about
noise in the morning.

Any ideas here . . .
Thanks in advance

06-26-2011, 09:11 PM
Check and see if the Waste Toner Container on the cartridge is overfilled. Otherwise check and replace the ratchet gear on Main Drive Clutch that drives the Fuser Gear. Good luck.