Thanks Thanks:  0
Likes Likes:  0
Results 1 to 4 of 4
  1. #1
    Senior Member
    Join Date
    Oct 2005
    Posts
    255
    Post Thanks / Like

    PLEASE ANY HELP
    I HVE ONE COPIER SHOW ME THIS CODE C 2403
    IT MEAN THE BOTTLE TONER ABONORMALITY

    I HAVE CHANGE A NEW TONER ORIGINAL
    BUT SOMETIMES SHOW ME THE CODE
    MOST OF BIZHUB 420 SHOW THIS CODE HOW CAN RESET IT AND SLOVE THIS PROBLEME

    THANKS IN ADVNACE
    JAMAL



  2. #2
    Junior Member
    Join Date
    Sep 2006
    Posts
    4
    Post Thanks / Like
    The Bizhub 360/420/500's are well-engineered workhorses - except for the toner replenishing system, which was designed by monkeys on crack. It uses a photo-interrupter located in close proximity to the open end of the toner cartridge to sense the toner cartridge rotation.

    Guess what? The sensor gets toner on it resulting in the error code.

    It is possible to remove the toner botle and clean the sensor using a vacuum cleaner with a long extension (and taking the usual precautions against static discharge), accessing it through the area where the toner cartridge goes. It can be seen (with a flashlight) at the rear of this area, on the left side.

    If that doesn't solve the problem, the next step is to replace the sensor. The good news is that it is a standard photo-interrupter. The bad news is that replacing it requires considerable disassembly.

    If that doesn't fix the problem, there may be an issue with the actual toner drive, although in my experience this is unlikely.



    Integrity Imaging
    www.gointegrity.com

  3. #3
    Junior Member
    Join Date
    Mar 2010
    Posts
    9
    Post Thanks / Like
    If you are still having the problem, there are some modified parts that may resolve your issue.
    They are:
    1- Toner supply guide assembly 50GAR70100
    1- Toner supply Holder 26NA32311E
    1- Bottle pressure spring 50Ga430600
    2- E-rings 00z670506


  4. #4
    Junior Member
    Join Date
    Jan 2016
    Posts
    4
    Post Thanks / Like

    toner bottle

    also, it may not look like it, but the toner bottle has to be installed correctly. the little notch at the end has to line up with the little slot in the machine. The slot is on the actuator and turns as the bottle turns, so it may not always be in the correct position. correct position is apx 1 o'clock

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •