Thanks Thanks:  0
Likes Likes:  0
Results 1 to 5 of 5
  1. #1
    Junior Member
    Join Date
    Sep 2013
    Location
    Cebu
    Posts
    2
    Post Thanks / Like

    Can not enter service or tech. Rep. Mode

    I can not view the service mode of my copier (konica minolta_bizhub 350). When I pressed bedeiner- details- stop 00- stop 01, password 00000000 or 12345678 - then END, the screen returned to ready to copy. What are other ways to follow so that I can view the service mode of this machine? Please help me. thanks!

  2. #2
    Junior Member
    Join Date
    Jan 2014
    Posts
    7
    Post Thanks / Like
    try main power off. power on holding utility button. hold till machine goes to trouble reset, push ok then enter stop-00-stop-o1.... this is a backdoor way in.....

  3. #3
    Junior Member
    Join Date
    Jan 2006
    Location
    Sherbrooke, Qc, Canada
    Posts
    11
    Post Thanks / Like
    This is an old post but originally, the problem is because you don't have the good password.

    And Bugsysiegel, this is not the good backdoor way for this machine...there is no trouble reset like other on this one.

  4. #4
    Junior Member
    Join Date
    Apr 2015
    Posts
    2
    Post Thanks / Like
    You have to hold till machine goes to trouble reset, push ok then enter stop-00-stop-o1.... this is a backdoor way in.and then look it
    Last edited by brightstar; 10-29-2015 at 03:24 AM.

  5. #5
    Junior Member
    Join Date
    Jan 2016
    Posts
    4
    Post Thanks / Like
    There is a reset, press the little button on the controller, located just next to the card slot you use for firmware update.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •