Results 1 to 2 of 2

Thread: Bizhub c451 Wrinkling Last 1/3 of page as exits on LETTER

  1. #1
    Senior Member
    Join Date
    Dec 2004
    Location
    California, USA
    Posts
    698

    Bizhub c451 Wrinkling Last 1/3 of page as exits on LETTER

    Legal, ledger are just fine, letter R most of the time is okay. Letter is bad everytime except once in a great while it will pass a good page.

    Swapped fusers, same problem. Cleaned rollers, same problem. Adjusted reg and fuser speeds, same problem.

    This unit has standard stapling finisher with bridge unit. Under 100k total copies!

    Any ideas?

    Thanks

    Kelly

  2. #2
    remove the fuser and check the sensor arm is still there , can be worn or broken off

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •