Search:

Type: Posts; User: PAULJ

Search: Search took 0.14 seconds.

  1. remove the fuser and check the sensor arm is...

    remove the fuser and check the sensor arm is still there , can be worn or broken off
  2. Replies
    1
    Views
    3,266

    polygon mirror motor needs a clean as the edges...

    polygon mirror motor needs a clean as the edges get fogging on them and the laser is not reflected.
  3. try the mod ribbed roller ( on the shaft as it...

    try the mod ribbed roller ( on the shaft as it gets fed up, or put it in the bypass on thick 1 so it up's the temp and slows the machine down a bit, good luck.
  4. Replies
    1
    Views
    2,672

    Try the black dev drive clutch, turn the dev...

    Try the black dev drive clutch, turn the dev roller by hand to mix what toner it has in it and then see if you get a tiny bit of black, if you do a sky shot.
    If not it may be the mfpb, also check...
Results 1 to 4 of 4