Thanks Thanks:  0
Likes Likes:  0
Results 1 to 6 of 6

Thread: Sharp MX-4501N

  1. #1
    Junior Member
    Join Date
    Sep 2011
    Posts
    3
    Post Thanks / Like

    Problem: Main transfer belt is transferring 1/4" strips of all colors and black to the 2nd transfer belt which then transfers those to the back of a copy only when doing single copies, if the job is two or more copies the lines only appear on the first copy.

    Solution: You tell me.

  2. #2
    Member
    Join Date
    May 2009
    Posts
    74
    Post Thanks / Like
    You need to change the transfer belt assy, don't try cleaning it you will only make it worst.

    I have in stock if you need one

    johnt@copierexpoinc.com



  3. #3
    Junior Member
    Join Date
    Sep 2011
    Posts
    3
    Post Thanks / Like
    John, I have already attempted that. We have a few of those machines in stock and in working order, so I swapped out the main assembly and no change, then swapped the secondary assembly and no change, then I swapped each drum and developer unit and still no change. Can you think of anything else?


  4. #4
    Member
    Join Date
    May 2009
    Posts
    74
    Post Thanks / Like
    Can you please sent me a sample of the first copy.

    johnt@copierexpoinc.com


  5. #5
    Member
    Join Date
    May 2009
    Posts
    74
    Post Thanks / Like
    I check with another tech, he said to check the fuser unit, he had a similer problem, and it was the fuser unit.



  6. #6
    Junior Member
    Join Date
    Jun 2010
    Posts
    4
    Post Thanks / Like
    try swapping out the laser unit.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •