Thanks Thanks:  0
Likes Likes:  0
Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    Jun 2005
    Posts
    52
    Post Thanks / Like

    i had replaced new toner bottles but it displays"READY(TONER NOT REGCONIZED)".


  2. #2
    Member
    Join Date
    May 2007
    Posts
    45
    Post Thanks / Like
    there are two interlock switches on the upper front cover one signals the logic the door is closed and the other (micro switch ) is in series with the toner feed motor ,if it does not actuate the bottle does not turn in reverse , and the cam on the bottle does not actuate the toner present micro switch which signals lodgic toner is present .note also a problem with this toner present sensor can cause the same problem


  3. #3
    Senior Member
    Join Date
    Dec 2004
    Location
    California, USA
    Posts
    700
    Post Thanks / Like
    Just using generic toner correct?

    Kelly


  4. #4
    Member
    Join Date
    Jun 2005
    Posts
    52
    Post Thanks / Like
    i used genuice toner cartridge but it display"toner not recognized " and when not display adding toner but copy page is too lights


  5. #5
    Senior Member
    Join Date
    Sep 2007
    Posts
    116
    Post Thanks / Like
    Quote Originally Posted by lyson View Post
    i used genuice toner cartridge but it display"toner not recognized " and when not display adding toner but copy page is too lights
    adding your developer powder solve the problem. i thought your developer already empty

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •