Toshiba e210C "Wait Warming Up"

**dankim** · 07-20-2005, 09:46 PM

Toshiba e210c
Onboard Fiery Controller

---

When turning the printer on the "Wait warming up" prompt never disappears and the printer is unusable.

Does anyone know:

1. What might be causing this to happen?
2. What I can do to fix this problem so the printer works again?

Thanks in advance for any help you can provide.

**Elvis** · 07-20-2005, 10:48 PM

I have seen this problem on the FC-22. On the power supply there are 4 or 5 very small green fuses one of them is blown.

**dankim** · 07-24-2005, 10:31 PM

Thanks for the information.

Do you have any idea how I find the fuses on my machine?

**TOSH-EUROPE** · 07-28-2005, 09:31 PM

Hi,

a) I have seen this problem with the eS-210c in case, that the duplex unit was not properly fitted.

You can take off the ADU and power on the copier. If it is the ADU the Fiery RIP will go online after a certain time.

b) the image of the embedded controller is corrupted. The only thing that helps is to download a new image from the controller system software CD.

Maybe you can verify if the controller works well in another copier.

Regards,

**christopherbonilla** · 08-12-2020, 02:24 AM

i have same problem with my unit toshiba e-studio 233

Thread: Toshiba e210C "Wait Warming Up"

Thread Tools

Search Thread

Display

Posting Permissions